Skip to Content
MilliporeSigma
All Photos(1)

Key Documents

View All Documentation

430129

Sigma-Aldrich

Poly(acrylonitrile-co-butadiene-co-styrene)

acrylonitrile ~25 wt. %, melt index 1-3 g/10 min (230°C/3.8kg)

Sign Into View Organizational & Contract Pricing
All Photos(1)

About This Item

Linear Formula:
[CH2CH(CN)]x(CH2CH=CHCH2)y[CH2CH(C6H5)]Z
CAS Number:
9003-56-9
MDL number:
MFCD00133993
UNSPSC Code:
12162002
PubChem Substance ID:
24866912

melt index

1-3 g/10 min (230°C/3.8kg)

composition

acrylonitrile, ~25 wt. %

impact strength

7.0 ft-lb/in. (Izod, ASTM D 256, 73 °F, notched)

hardness

105 (Rockwell R, ASTM D 785)

solubility

acetone, MEK and DMF: soluble
water and alcohols: insoluble

density

1.05 g/mL at 25 °C

SMILES string

C=CC=C.C=CC#N.C=Cc1ccccc1

Looking for similar products? Visit Product Comparison Guide

Application

General purpose molding polymer.

Features and Benefits

Good impact, resiliency and good moldability.

Storage Class

11 - Combustible Solids

wgk_germany

WGK 3

flash_point_f

Not applicable

flash_point_c

Not applicable

ppe

Eyeshields, Gloves, type N95 (US)

Choose from one of the most recent versions:

Certificates of Analysis (COA)

Lot/Batch Number
09214DN

Don't see the Right Version?

If you require a particular version, you can look up a specific certificate by the Lot or Batch number.

Search for a COA

Already Own This Product?

Find documentation for the products that you have recently purchased in the Document Library.

Visit the Document Library

Xinmin Liu et al.
Environmental technology, 33(16-18), 1987-1992 (2012-12-18)
The disposal of waste plastic crusts of televisions is an issue that is gaining increasing interest around the world. In this investigation, the pyrolysis and catalytic cracking of the waste television crusts mainly composed of acrylonitrile--butadiene-styrene copolymer was studied. Thermogravimetric
Woo-Hyuk Jung et al.
Environmental science & technology, 43(7), 2563-2568 (2009-05-21)
Cellular phone housings were ground to make original particulates using a knife mill. Foams and adhesives with a lighter density than water were removed from ground mixtures using a sink-float process in water; ground metals, button rubbers, and wires were
Brad M Isaacson et al.
Journal of rehabilitation research and development, 46(9), 1109-1120 (2009-01-01)
Developing noninvasive tools that determine implant attachment strength to bone and monitor implant stability over time will be important to optimize rehabilitation protocols following insertion of osseointegrated implants in patients with limb loss. While resonance frequency has been previously shown
Bo Lai et al.
Huan jing ke xue= Huanjing kexue, 32(4), 1055-1059 (2011-07-02)
Wastewater from the condensation and drying section of acrylonitrile-butadiene-styrene (ABS) resin plant was pretreated by the microelectrolysis, and the effect of the influent pH value on the pollution removal efficiency of the microelectrolysis was mainly studied. In order to study
Chia-Yuan Chang et al.
Bioresource technology, 102(9), 5337-5344 (2011-01-18)
A two-stage aerobic membrane bioreactor (MBR) system for treating acrylonitrile butadiene styrene (ABS) resin wastewater was carried out in this study to evaluate the system performance on nitrification. The results showed that nitrification of the aerobic MBR system was significant
View All Related Papers

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service